Remanns – Delivering Remanufactured Engines Following Best Practices

Remanns.com is USA’s most reliable distributor and is having 30+ years of experience in this industry. Its main motto is to gain the trust of their valuable clients and provide quality products that promise the best performance on roads. They have their own engine remanufacturing process and here we are outlining some procedures that they use in remanufacturing to offer you the engine similar to a new one that could perform even better to the new one in some aspects.

Things considered while remanufacturing a engine

• To check the proper oil flow and cylinder compression, real main seal and integrity pressure they spin test the engine.
  
• To assure the best performance of water jacket, engine goes through pressure test.
  
• They replace most important parts of engines—rings, gaskets, pistons, bearings, valves and valve springs, timing chain/belt, and freeze plugs—with the updated ones for its smooth functioning.
  
• The re-cut of valves, vacuum and pressure test assures that you are getting the best engine.
  
• They add new gaskets and water pump to your engine to increase its potentiality.
  
• For perfect finishing of size and tapering they align blocks—honed, bored, and cylinder honed—with computerized machines.
  

Remanns uses standardized processes and its expert mechanics ensure that the engine you get performs at its best, even better than the new engine on some parameters.

Step-by-step remanufacturing process at Remanns Engines

1. Disassembling the engine blocks comes first and in this process all the parts are checked on individual basis to check out any type of damage. It is the best way to find the main reason behind engine failure.

2. By removing all the parts it will be easy for technicians to do the second most important thing i.e. the cleaning of engine block.

3. Detecting cracks & other imperfections in any part of the engine is a significant thing to ensure great performance of your vehicle. And when it comes to good results, nothing compares to the magnetic particle process adopted at Remanns.

4. After checking every loophole it is the time to reassemble the engine with its working parts. All the things—correct valve train setup, compression, oil pressure, oil flow, correct timing, vibration, variable valve-timing actuation, unusual noises and fluid leaks—are rechecked before delivering the engine.

As a vehicle owner it is important for you to know the entire process of remanufacturing the engine. And when you are in Remanns you don’t have to take second thought on it. Just go for it and get the best working engine ever.