Red PCB KESS 5.017 +KTAG Red V7.020 4LED +BDM Probe Adapters No Token Limit

by Xing Tu sales manager

KESS V5.017 Red FULL SET + KTAG V7.020 Red 4 LED SET + 22pcs BDM Probe Adapters+ LED BDM Frame+40 PCS BDM PIN+4PCS ECU COVER TOOL.

KESS V5.017 Red FULL SET:

KESS V2 5.017 Red PCB Firmware Support Online Connection No Token Limited

KESS V2 V5.017 With Red PCB Features

1. With best PCB board.
2. Better performance,function as well as more online protocols supported.
3. Online Operation Supported,No tokens limited.
4. Multi-Languages supported.
5.Perfect for OBD use,Read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use .
6.No reset button,no USB dongle,no tokens limited and has tested by many users as well as our technology department, 100% workable.

1.. the left upper corner and the lower right corner notch size is not the same
2.More than buzzer
3.WFs = Infineon, BCR112 NPN Digital Transistor
4.27E = ON Semiconductor NUP2105LT1G
5.6DW = NXP BC817,215 NPN Bipolar Transistor
6.A6c =MMUN2113LT1G / MMUN2113LT3G
7.K5B = BC807-25-7-F PNP Bipolar Transistor
8.Using imported Japanese Murata filter NFE61PT472C1H9L

Red PCB KESS 5.017 Ksuite 2.47 European Version

1.Check of the battery voltage in real-time
2.Full Recovery function in case of problems
3.Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5.Management of the programming counters
6.ScanTool function to remove DTC
7.Several options of reading/writing speed
8.Option to write full file/section of the map
9.Full integration with ECM Titanium,which means it can work with ECM Titanium perfectly

FAQ:
Q1 : Is it original KESS 5.017 EU or KESS V2 5.017 CN EU ?
A1 : It is the red kess 5.017 china version,but with original databases ,with new NXP + Newer SD Card to provide better quality as well as performance. And Red KESS 5.017 EU Version has been tested by many tuners 100% workable with decent quality at cheap affordable price.

Q2 : Will Red KESS V5.017 Europe Version can be used online with Virtual file ?
A2 : Yeah,of course,online operation supported,no tokens limited.

Q3 : What is the advantages of KESS 5.017 With Red PCB EU over than KESS FW5.017 Green PCB ?
A3 : To be honest, these two kits shared almost same features, the only different lies in the red kess v2 5.017 has same look as the original one and used better PCB to provide better quality.

Q4 : How many online protocols will New Red PCB KESS 5.017 EU Supported ?
A4 : KESS V2 5.017 With Red PCB EU can support 140+ online protocols unlimited tokens and We also have attached the KESS 5.017 Red supported vehicle list in our product page,you can download to check freely.

Package List:

1 x Kess v2 V5.017 Main Unit
1 x 144300T 104
1 x 144300T 103
1 x 144300T 101
1 x 144300T 106
1 x 144300T 102
1 x 144300T 105
1 x 144300T 100
3 x Chips Inside
1 x Multi-Color Cable
1 x USB Cable
1 x Power Adapter
1 x CD

KTAG V7.020 Red FULL SET:

EU Version Red PCB New 4 LED KTAG 7.020 Firmware Latest V2.23 No Token Limitation Multi-Language Online Version

KTAG V7.020 Informations:

Hardware Version:V7.020 Software Version:V2.23
Alientech Master Version ECU Programming Chip Tuning Tool
No Tokens Limited,Unlimited Version
PC Supportes: Windows XP Professional/Win7/Win8
Update:By CD or Download link only
Languages: Italian Dutch English French Portuguese Spanish

Very Important Tips:

1.Please DON'T update the KTAG online, it will damage the Unit ,and can not use any more .(You have to send back to repair,so please pay more attention)
2.Please DO Close anti-virus program when you run software

KTAG V7.020 Description:

K-TAG ECU Programming Tool is designed entirely around the needs of our customers to be more responsive and reliable.
A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for Asian vehicles.
Available Protocols for K-TAG: BDM MOTOROLA MPC5xx
Support BDM Function Well, No Checksum Error
Support both Car, Truck ECU Programming

KTAG 7.020 add new color GPT Cable for GPT Function:
GPT is new password algo cryptography that is implemented in new Tricore microcontrollers. our KTAG v7.020 can easily read and decrypt the secret password and it automatically unlocks/unprotects the Tricore sectors so it can read and write both Flash and Eeprom

KTAG V7.020 Red PCB different information:

Murata filter
Buzzer protect
Red PCB EU Version With 4 LED Indicators:
ECU/KEY/Power/Data LED Indicator

The new K-TAG is 100% J-Tag compatible, but in a completely different way. Usually J-Tag programmers are available only for big productions,
never present in chiptuning devices. Using only the essential components, Alientech have merged J-Tag, Motorola BDM/Nexus and
Bootloader FOR Mitsubishi/Infineon Tricore/ST communication lines into a single product.

K-TAG works in perfect harmony. Learn how to use K-TAG takes almost no time, because all the communication protocols operate along
similar principles. Once you have learned to use a protocol, you will naturally use all the others. Alientech knows what it means to work in motion.
For this reason the research methods of the protocols and choice of vehicles are detailed and ordered.

Unlike many ECU programming tools, with K-TAG you have at your disposal only the applications you really need. Once you have the hardware,
you can choose which group of protocols to enable and then start working. In this page you can find a complete list of the ECU currently supported
by K-TAG.

Just as the full range of Alientech programmers, K-TAG is available both in Master and Slave version. This way, Slave user can rely on the
larger network of Master in the chiptuning field.The only thing that K-TAG does not do: OBD Communication. But for that you can count on KESSv2.

To use K-Tag at best on any kind of Electronic Control Unit, Alientech offers you a wide range of special adapters, to be soldered on
the ECU or to be used on the positioning frame.

Fllowing details of the accessories available in car list catalog per each group of protocols of communication

BDM Motorola MPC5XX

14AS00T01S: Adapter to be soldered to the ECU
14AS00T02S: Cable with connector to be soldered to the ECU
14AS00T03S: Adapter to be soldered to the ECU
14AS00T04S: Adapter to be soldered to the ECU
14AM00T00M: Board for connection through positioning frame
14AM00T01M: Board for connection through positioning frame
14AM00T02M: Board for connection through positioning frame
14AM00TBAS + 14AM00TB01: Board for connection through positioning frame, with pull-out tip 14AM00TB01
14AM00TBAS + 14AM00TB02: Board for connection through positioning frame, with pull-out tip 14AM00TB02
14AM00TBAS + 14AM00TB03: Board for connection through positioning frame, with pull-out tip 14AM00TB03

J-TAG Nexus MPC5xx

14AS00T05S: Adapter to be soldered to the ECU
14AM00T05M: Board for connection through positioning frame
14AM00T06M: Board for connection through positioning frame

J-TAG RENESAS SH705xx

14AM00T07M: Write Board for connection through positioning frame
14AM00T08M: Write Board for connection through positioning frame
14AM00T09M: Write Board for connection through positioning frame
14AM00T10M: Read Board for connection through positioning frame
14AM00T11M: Read Board for connection through positioning frame

BOOTLOADER INFINEON TRICORE

14P600KT04: Board for connection through positioning frame

BOOTLOADER ST10

14AM00T03M: Board for connection through positioning frame

Best BDM Probe Adapters:

LED BDM Frame:

No ECU Board in this package! LED works for 12V. Once you connect with probe,
then you disconnect 12V battery for LED,it will works.The probe pin is adjustable.

LED BDM Frame Descriptions:

1.It is Made by Acrylic board, With Mesh and 4 Probe Pens.
2. LED works for 12V. Once you connect with probe,then you disconnect 12V battery for LED,it will works.The probe pin is adjustable.
3.This LED BDM FRAME is best bracket For ECU Update/ECU Brush And Write/ECM Modified and programming/Probe holder/Dimsport aids.
4. Work on KESS V2,KTAG,FGTECH Galletto,BDM100,KTM100,CMD, DIMSPORT AIDS...ECM Chip Tuning Tools.
5.It is easy to be used,much better than old bdm frame.

Please Note: No ECU Board in Package

40 PCS BDM PIN:

BDM Frame Pin

Works together with BDM Frame.

4PCS ECU COVER TOOL:

(Color: Gold and Silver, random shipments)

ECU Open Tool For Kess Ktag Fgtech details:
Useful tools for opening the ECU.
By screwing the tools instead of screws, the cover is lifted upwards in a uniform manner, avoiding to fold or damage the ECU when inserting screwdrivers for leverage.
To facilitate the removal is advised to heat the lid so that the silicon softens.

100% Brand New & High Quality of ECU Cover Extractor Car Computer Removal Tool:
This Tool is designed to remove/ install car ECU computer cover easily.
Works perfect with ECU tunning tools, such as KTAG, KESS, FGTECH.
Need to use four or six at a time depending on the type of ECU coverage.
Must be fixed in place of the screws on the control unit and allow the user to remove the cover without damaging or deforming it.

https://www.ebay.com/itm/Red-PCB-KESS-5-017-KTAG-Red-V7-020-4LED-BDM-Probe-Adapters-No-Token-Limit/123314354940?hash=item1cb61bbafc:g:R1AAAOSwlCBbdTL9