Red KESS V2 5.017 EU Master Purchase Tips
by Xing T. ***
As many tuners have known,ther are two ways to flash ECU : OBD2 communication port or via a special BDM port that is on the ECU’s motherboard. For the time being, Red KESS 5.017 is the best OBD2 flasher tool to allow tuners to read and write ECU via OBD2 port directly, no need disassemble ECU from the car, easy to use. Red KESS V2 5.017 supports online 140+ protocols without tokens limited,no years limited and most important,it has been tested by many users and has been confirmed,kess 5.017 is a amazing chiptuning tool for multi cars and trucks.
Well, We also should know that ,there still have lots of ECUs can’t be directly flash via obd2 port,in this case,you need use Red PCB KTAG 7.020, Red KTAG 7.020 is a top Bootmode tool you can program the ECU through one of the communication ports (BDM/JTAG) on the circuit board and it is perfect for all the ECU that need to be programmed with Jtag, BDM and Boot protocols,and the ktag with gpt cable to support gpt functions as well.
Purchase Tips Guide For Customers Summary : Well,Based on my sales experience as well as autocardiag.com customer’s postive feedbacks,i strongly recommend customers buy Red PCB KESS 5.017 KTAG 7.020 + LED BDM Frame Full Set together, cuz, have both kess ktag in hand,you can flash more ecus and the led bdm frame was a ideal ecu dismporting assasistant tools ,what’s more,this set was cheap but the quality is top.
Created on Jul 21st 2018 11:50. Viewed 244 times.