Popular Engagement Ring Settings

When it comes to choosing the right engagement ring, there are so many things to consider. First of all, you need to figure out your budget. Then, you need to choose the size and shape of the diamond, and the type of metal for the ring. Next, you need to choose the type of setting the stone will be placed into. There are several different settings to choose from. Here are some of the most popular settings for engagement rings.

Bezel

With a bezel set engagement ring, there are no claws holding the diamond in place. Instead, there is a circle of metal around the stone that is called a bezel. This type of setting can be made for any shape of diamond, and if the stone isn’t perfect, the bezel will hide the imperfections.

Half-Bezel

This is similar to the bezel setting, but the metal frame isn’t complete. Instead, only part of the stone is surrounded by metal, so more of the diamond is showing through. This is just as secure as the bezel setting, and is ideal for a solitaire diamond (single stone). If you are interested in a half-bezel or a full bezel set engagement rings, check out the huge selection at krikawa.com.

Channel

This type of setting is for engagement rings with multiple diamonds. There is a channel, or two rows of metal, and the stones fit snugly between these two rows. The stones are set into a straight or a curved line, and this is a style that is reminiscent of art deco.

Bar

This is a lot like the channel setting, but there are metal “bars” on either side of the stones. Again, this is a setting that is best for multiple diamonds, with round diamonds being most suitable. If your girlfriend prefers a contemporary look for jewelry, this setting is a good option.

Invisible

An invisible setting is where multiple square-cut or princess cut diamonds are set in a grid. The diamonds are actually set in a tongue and groove manner, inside of a metal frame. This setting is not used for a center stone. The center diamond is the most important part of any engagement ring, and the setting should make the diamond stand out. However, you do want enough metal holding the stone to make your investment secure, so beware of minimal metal settings for center stones.

Pavé

This type of setting is used when there are multiple, small round-cut diamonds in the ring. The diamonds are set close together, giving the appearance of one large stone, or an area of diamond paving. The diamonds are held in place with small beads of metal. These beads are sometimes cast in place, which is a weaker version of the best type of pavé, which is the old-European style hand-cut pavé.

Prong

This is the most commonly-seen type of engagement ring setting, with claws holding the diamonds tightly in place. The claws are actually metal prongs, and the prongs are bent slightly at the top so they press against the diamonds. This is a popular setting for a single-stone ring. The most popular are 4 prong and 6 prong settings. A 6 prong setting is more secure, because if one prong is bent or worn down, your diamond is less likely to fall out.

V-Tip Prong

This type of setting is used for pear, princess, and marquise cut diamonds. There are v-shaped prongs that hold the stone at the corners, and the prongs are bent to keep the stone in place. The V-prong protects the corners of the diamonds, which can chip or crack easily if when they are not protected. In the case of a marquise and pear diamond, the v-tip prong is used in conjunction with standard prongs.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 31st 1969 18:00. Viewed 0 times.

Share on APSense

Comments