Articles
Low Pressure and High Pressure Application Pumps That Accept Variety of Chemicals
by R Anoop SEO R AnoopNeptune Glycol Feeder is used for adding glycol solution to closed systems of chilled water or hot water. By adding glycol solution the pressure is maintained automatically in the system. The adjustable pressure switch controls addition of glycol. As soon as the pressure reaches the low set point the pump starts feeding glycol into the system and when pressure reaches the high set point feeding glycol is stopped. Neptune Glycol Feeder is provided with a NEMA 4X control panel, Float switch for alarm and shut-off, rotary gear pump made of bronze and polyethylene tank of 50 gallon capacity mounted in a steel frame.
When liquids are to be pumped from one container to another container it is advisable to use the Pump for Chemicals. Since different liquids are of different chemical characteristics, the functional methods of these pumps are also based on different principles. The manufacturers of the Pump for Chemicals had made the selection of the right pump for transfer of chemical liquids by choosing the capacity of the pump and the pressure required. The Stenner 45mhp10 adjustable output pump with single head are self-priming metering pumps and for these pumps diaphragm and anti-siphoning valves are not required since the pump tube receives a positive 2-point seal at all times. Stenner 45mhp10 pumps enable metering of gas without exposure to air and these pumps are used for high pressure applications.
Stenner Pump 85m5 adjustable output pumps with single head are used for low pressure applications. Just like the Stenner 45mhp10 pumps, these pumps also function without diaphragm and anti-siphoning valves. The output of this pump can be increased just by turning the dial. Stenner Pump 85m5can be used for variety of chemicals and the chemicals are metered without exposure to air. The Water Dosing Pumphas numerous industrial applications and hence these pumps are of great demand in the market. This type of pump has a high flow rate and is used to pump different types of liquids such as chemicals, viscous fluids, slurry, corrosive as well as abrasive liquids and many other types of liquids. Stenner 85mhp5 pumps are self-priming and their output can be raised rapidly just by turning the dial. This type of pump has peristaltic design and accepts varieties of chemicals. The chemicals are metered without exposing them to air.
Sponsor Ads
About R Anoop SEO 
R Anoop
272 connections, 2 recommendations, 752 honor points.Joined APSense since, May 17th, 2014, From New Delhi, India.
Created on Oct 16th 2017 23:47. Viewed 516 times.
