Articles

Learn the Best Tricks to Eliminate Brother Printer Error Code 71

by Stella J. Customer Support Executive

Sometimes due to various reasons, the Brother printer occurs some errors like Brother printer error code 71. This error occurs due to some issues in the printing machine scanner motor or any technical problem in the printing device. The printer unable  71 show on the printer’s display. To reset the device, you may need to use the ‘Power switch’ key and switch off the device. 


However, the Brother printer error code 71 message has to deal with the laser unit polygon motor. The polygon motor is unable to reach its operating speed in a fixed time, the printing device is showing the same SMS which says unable to print 71. To remove this error code, you may need to follow some troubleshooting steps that are listed below. In this article, we will teach you to solve the error code 71 without any difficulty. To know more about this error, dial Brother printer support USA


 Easy Steps to Fix Brother Printer Error code 71. 


To fix the error code 71, you need to apply the best and helpful troubleshooting steps that will help you in solving this error code. If you don’t know the troubleshooting methods, then don’t worry and follow the given steps that will help you to overcome this problem at a couple of times


  • First of all, carefully check the firmware version of the printing device to make sure that your printing machine is working on the right setting or not. Verify that the device is working on the latest firmware.

  • Once successful updated, apply the next step and check the main reason behind this error code. 

  • After that, long-press the power button and switch off the printing machine and wait for a few seconds at least 15 to 30 seconds. Again switch on the printer through pressing ‘Power’ button which is located on your printer screen.

  • The brother printer can be switch off for up to 4 days without even losing the faces in the memory. After four days, if the data and time shows appear on the screen, this indicates that the issue is solved. Also Read: Learn Easy Process to Remove Brother Printer Error TS-02

  • In case,  this error code 71 still arise on the screen, then your printer needs service. Thus if there are some faxes stored in memory, then one of the best solution it to another fax machine easily.

  • For this print as per the users set.  Easily press the menu option.

  • After that, press the ‘Print reports” button.

  • Then, navigate to the ‘ users settings’ and press the ‘start’ key.

  • Once the user’s setting accurately applicable, then this error will not show on the screen. 


These steps will help you to solve this error in a secure way. If you are not eligible to understand this error, then don’t worry. You can take assistance from the experts that will help you to solve your problem in a short period of time. For your help, we also provide Brother USA printer support, which will help you in solving your entire problems regarding Brother printer. For any assistance, you can dial +(1)-888-846-5560 24*7. Apart from it, you can contact us via email and chat.


About Stella J. Innovator   Customer Support Executive

16 connections, 0 recommendations, 50 honor points.
Joined APSense since, July 11th, 2019, From Reeding, California, United States.

Created on Aug 6th 2019 07:32. Viewed 66 times.

Comments

sophia smith Junior  Printer support number
Very nice article, thanks for sharing.
Aug 13th 2019 05:47   
Please sign in before you comment.