Installation guide: GM MDI Tech 3 Tech2Win GDS 2 Software
by Yong Yang China Brand Universal Programmer This article is an installation guide for GM MDI Tech 3 Tech2Win GDS 2 Software on Windows 8 / Windows 7, it will help the customer install GM MDI Tech2Win GDS 2 for use on a personal vehicle, Installation instruction of GM MDI Tech 3 Tech2Win GDS 2 Software on Windows 8GM MDI Tech 3 Interface is Dealer Level Diagnostic Tool for Multiple Brand vehicle: GM, Opel, Chevrolet, Saab, GM MDI Tech 3 is the new auto diagnostic tool between the vehicle DLC and a PC, it can be used for SPS programming on existing and future SGM vehicles.
How to install GM MDI Tech2Win GDS 2 Software
1: Open the software folder, double click “CD Start”pop-up installation window,and click “install”.
2: Pls install the software in order : JAV A.EXE;Validat.exe;GMMDI Software.exe;Tech3Win.exe;.
3: automatic install all the files above, when have message “ Copying PCMCIA files..”,please don’t touch any keyboard or mouse, just leave it alone, the GM MDI USB drive will automatic install.
4: after installation finish, there will be have a message “ press any key to continue…” and pls press any key, and software installation partly finish.
5. Pls connect the USB cable to PC ( do not need to connect to the Car OBD at this time), the first time connect USB to PC, the USB drive will be detected on the lower right corner, then choose automatic install, click next to finish.
6. when USB drive installation finish, on your PC device manager ,you will find a “MDI USB Device(COM…” on Port place. if not then pls find the drive on MDI folder on the CD and install, if still not successful, then pls check if the PC operation is correct or not.
7. open “GM MDI Manager” on the desk to do connection test (if the USB was correct installed, the red “X” on the dialogue will disappear, if the red “X” still on, then pls repeat steap 6.
8: finish the installation above, pls connect your PC with internet. ( do not connect to the car OBD ) open this website and activate lease.http://tis2web.eicp.net:9080/tis2web/after you open this web. Write any user’s name and click ok. All choose OK /continue.
9: in the main interface, please click “Global Diagnostic System2(GDS 2)” icon, and click GDS2 to run, at that time, software will update lease automatic .after update finish, software GDS2 (Launch GDS2 on the desk) will open automatically , choose the language and back to the main interface. Bottom left will have a lease expire time. Be attention, it need only your PC systerm time, don’t change. Afterward we don’t need internet to update lease, so if there have any remind indicate new update available, please do not click update.
GM Tech 3 MDI Manager 7.14:
http://www.mediafire.com/?whuesegrc8cw9qp
V8.0.73.14 GM MDI Manager:
http://yunpan.cn/Q4LiCyMVRxpqm
if you have problem with MDI GDS 2 software, you can order 2.5' SATA HDD that install MDI Tech 3 Global TIS, GDS 2, Tech2Win Diagnosis software, MDI Tech 3 is Vauxhall / Opel OEM Level Diagnostics tool, which when combined with Global TIS, GDS 2, Tech2Win diagnosis software
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.
Comments
No comment, be the first to comment.