Articles
Individual components from the cement plant on cement manufacturing
by Pooja Late so cutThe manufacturing
process of cement with the types and properties of cement is explained in this
article for your reference. This page linked with the detail of cement
manufacturing from the cement factory. The material cement is naturally made
with the raw materials of clay or shale with the limestone. These raw materials
are crushed with a certain composition to produce different cement materials.
Powdered raw materials will be mixed in different proposition to produce
different types of cement. Contains the cement will distinguish the material
type.
Arbitrary of the cement production process
Cement is the
typical material which is in high demand to start and complete the bottom line
on construction works. The blended raw materials of Limestone, clay or share
will be undergoing for the heating process in the rotary kiln. As per the
quality of product from the cement
factory, the heating process will take place. The heating process will take
place in between the temperatures of 1400C to1500C.
How the cement gets out from the kiln?
A kiln is a tool
which is attached with the large 200-meter tube within 6-meter diameter at one
end. Heating the cement will be done with the help of long flame at one end of
the kiln. After the heating process, the powdered raw material will come out
from the connected tube. At the time the cement comes out from the kiln will be
hot but within a few minutes it gets cools down.
Types of cement
As per physical
look and the chemical properties, the cement types will vary. Primary the content
of cement is similar to every cement type but the level of composition matters.
The ability of hydration and resist sulfate attack is the natural quality of
cement. In the cement factory, the
responsibilities of oxide and mineral composition primarily differs the cement
types.
Type1 – This
cement type is suitable to use for general classification purpose. Characteristic of this cement is fairly high
with the content of C3S to strengthen the development.
Type 2 – Level of
C3S contains in this cement is lesser and it is classified as Moderate sulfate
resistance. This cement type is best to apply on the surface which is exposed
to soil.
Type 3 – it may
contain slightly more C3S with high early strength. It can be used in rapid
construction to ground more finely. Even it is used in cold weather concreting.
Type 4 – Contain
of C3S in this cement is partial to the raw material of C3A. It reacts slows
and suitable to heat at a low temperature of hydration.
Type 5 – High
Sulfate resistance cement to seal the exposed surface with high sulfate ions.
White cement – the
material of white cement is visible in white color and it is doesn’t contain
any C4AF. Mostly it is used for decorative purpose and rarely it used as Type1
cement.
Bottom line
From the aforementioned
statements, you may get the information related to cement manufacturing. Before
appointing the cement for your construction work investigates the properties of
cement and toughness on burning. Get the desirable cement with the value
properties to fit for your requirement and budget.
Sponsor Ads
About Pooja Late 
so cut
193 connections, 0 recommendations, 600 honor points.Joined APSense since, January 22nd, 2015, From mumbai, India.
Created on Aug 23rd 2019 00:13. Viewed 651 times.
