Important Steps of Troubleshooting For Dell Printer

A dell printer is specially designed to match growing needs and demands of home and office users at every stage. This device is well designed in the special manners along with latest & user friendly features and technological concepts.  Anytime, your dell printer can experience technical problems and begin malfunctioning. If you will not take care immediately, your printer can face some kind of damages. If you feel any kind of difficulty regarding dell printer, you should go to take Dell printer support immediately. Therefore to apply troubleshooting process and fix some common dell printer issues, we have explained some important steps shared here.

If the printers are dull but on other hand the toner cartridges are full, you should need to check the PHD immediately. This print head device plays a big role for transferring the print image to a printing paper.  Hence if it shows the end, it may be the reason of printing fade. Sometimes, PHD displays the message of “Replacement of PHD” at the endpoint. However, if you do not get such type of messages and yet now see faded prints and check out PHD immediately. You should replace it if it is going to finish. If you are unable to identify exact technical issue, you should take Dell printer help immediately.

When you are using a Dell printer-cum-scanner device and get a message suddenly “Scanner locked” and give this method a try immediately. If Dell printer is on, then power it off. Lift up the scanner unit in such way that it goes to make a click and lock sound perfectly. The scanner unit will be situated in the front of your printer.  After this, you need to seek lock switch of the scanner and you need to pull out it in your direction. The lock switch will be situated on the left hand side of the scanner next to scanner support.

After this procedure, you have to pick up the scanner unit once again and drive back the scanner support and you have to hold it. Next step is to leave the scanner unit gradually. And now, unit goes down slowly when it is closed completely. When this process is done, you should power on the dell printer. Another step to unlock the scanner is to seek for a lever where printout comes out. Second step, you need to hold and unlock it. The scanner will discharge after that. If you are not able to repair your printer, you should hire Repair dell printer services affordably.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 31st 1969 18:00. Viewed 0 times.

Share on APSense

Comments