How to Update SKP1000 Key Programmer Firmware ?
by Nancy N. DIY diagnostic and car repair tools SKP1000 auto key programmer Replacement Lonsdor CI600 Plus (Chinese version), mainly programs kinds of key on a wide range of car brands from all of the world, as well as SKP1000 performs pin code calculation, mileage adjustment, EPB+ Oil serrvice Reset and many other special functions etcguide you how to update its firmware as below
Before update firmware, please take out the TF card and insert it into the card reader, then plug into the computer USB port. Double click “My Computer”, find out ” local Disk (H:), right click to choose “Format”.
Tip: Tick on the “Quick format” and click “Start.
After complete format, go to the official site to download the update file, then copy and paste the file into the TF card, after finish, plug the TF card into the machine, power on the machine to the main interface.
Click on “Firmware update”.
Firstly choose “System firmware update”, press “Yes”, the procedure shown as below:
Update successfully shown as below.
Press “No” to back.
Choose ” Adapter firmware update”, after finish, reboot the machine to go on use SKP1000.
Done.
the firmware update is very easy,if any question or problem,please feel free to contact Nandrepair.
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.