Articles
How to Maintenance JLG X14J Lift Machine Gearmotor
by Dave Jack Auto Car Repair KnowledgeThis instruction show you guide on how to maintenance JLG X14J lift
machine. gearmotor.The gearmotor only requires the scheduled maintenance
procedures set out by the manufacturer (see Table below).
JLG Technical Library Service Repair+Parts Manual 2020 Download
Good maintenance will ensure an on going functioning in time as well as maximum reliability.
Should
irregularities in function arise, it will be necessary to consult the
troubleshooting checklist to find the most adequate solution.
If unsuccessful, it may be necessary to disassemble partially or completely the motor gearbox.
2020 JLG Lift Technical Library Service +Parts Manual PDF
CHANGING THE LUBRICATING OIL
1. Place a large enough container (about 1 litre) under the oil drain plug.
2. Unscrew the plug (2).
3.
Unscrew the oil drain plug (1) and allow the oil to drain. To
facilitate the draining operation, it is better to work with hot oil.
4. Wait a few minutes until all the oil is drained and than proceed to screw on drain plugs (1-2).
5. Proceed with the oil fill-up following the procedures given.
DO NOT DISPOSE OF THE OIL IN THE NATURAL ENVIRONMENT
BUT BE CAREFUL TO ELIMINATE IT IN COMPLIANCE WITH THE
RELATIVE RULES AND REGULATIONS THAT GOVERN LOCALLY.
Sponsor Ads
About Dave Jack 
Auto Car Repair Knowledge
12 connections, 3 recommendations, 149 honor points.Joined APSense since, April 13th, 2017, From Tukwila, United States.
Created on Sep 5th 2021 19:51. Viewed 149 times.
