how to install gm gds2 and tech2win software

by Yong Yang China Brand Universal Programmer wifi GM MDI is a new GM Diagnostic tool, When you want to test before 2010 year GM car, you can install and use techwin software, GM MDI tech3 diagnostic tools is not only work for the new gm car, but also for the old kind of car. It can test GM car from 1990-2012.

here, we share the GM MDI tech3 installation guide, guide how to install MDI GDS and GM MDI Manager tech2win software on your laptop

PC specification require: Full installation version WIN XP3, pls install all the systerm patch (picture 0)
1: Open the software folder, double click “CD Start”pop-up installation window,and click “install” ( Picture 1)
2: Pls install the software in order : JAV A.EXE；Validat.exe;GMMDI Software.exe;Tech2Win.exe; (picture 2-6)
3: automatic install all the files above, when have message “ Copying PCMCIA files..”,please don’t touch any keyboard or mouse, just leave it alone, the GM MDI USB drive will automatic install. (Picture 7-10)
4: after installation finish, there will be have a message “ press any key to continue…” and pls press any key, and software installation partly finish ( Picture 11)
5. Pls connect the USB cable to PC ( do not need to connect to the Car OBD at this time), the first time connect USB to PC, the USB drive will be detected on the lower right corner, then choose automatic install, click next to finish.
6. when USB drive installation finish, on your PC device manager ,you will find a “MDI USB Device(COM...” on Port place. (Picture 12) , if not then pls find the drive on MDI folder on the CD and install, if still not successful, then pls check if the PC operation is correct or not.
7. open “GM MDI Menager” on the desk to do connection test (if the USB was correct installed, the red “X” on the dialogue will disappear, if the red “X” still on, then pls repeat steap 6
8: finish the installation above, pls connect your PC with internet. ( do not connect to the car OBD ) open this website and activate lease.
http://tis2web.eicp.net:9080/tis2web/after you open this web. Write any user’s name and click ok. All choose OK /continue ( picture 15-17)
9: in the main interface, please click “Global Diagnostic System2(GDS 2)” icon, and click GDS2 to run, at that time, software will update lease automatic .after update finish, software GDS2 (Launch GDS2 on the desk) will open automatically , choose the language and back to the main interface.
Bottom left will have a lease expire time. Be attention, it need only your PC systerm time, don’t change. Afterward we don’t need internet to update lease, so if there have any remind indicate new update available,please do not click update (picture 18-21

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 31st 1969 18:00. Viewed 0 times.

Comments