How to fix top 6 common HP printer problems

Although known to be sturdy, reliable and efficient, like any other electronic device, HP Printers can also give up in high demanding situations. We all know what it feels like to be left in the lurch when a printer stops functioning when you need it the most!

If you have been in such a situation don’t worry, we tell you how to fix 6 common HP Printer problems.

1. Jammed paper

Paper jamming is the number one issue faced by HP Printer users. To ensure that this problem doesn’t recur, make sure you use the correct paper type and keep your printer clean. Also check if the paper roller has been worn down. If this is the case you will need to replace the rollers with new ones.

2. Faded printing

Faded or blurred printing can be caused if the printer is low on toner. Remove the cartridge after turning the printer off and shake it a few times so that toner is evenly distributed. This will solve your complication temporarily until you a buy a new cartridge.

Another reason for faded printing is if your Economode is turned on, or if you have set the print density too low. In these cases, adjust the settings accordingly.

3. Image ghosting

Printing of double images on the paper is termed as ghosting. The causes for this are two: either there is a problem with power supply or with printer parts like imaging kit, drum, etc.

The power issue can be diagnosed by checking if another printer with the same power supply delivers the same results. If not, then you will need to replace the outdated printer parts to eliminate the issue of image ghosting.

4. Display of the 50.4 error message

This error message is most often caused by a power supply issue. To rectify this situation, try disconnecting the printer from the UPS and plug directly to the power source. This should resolve your problem. If you can face any problem you can call HP support number 1-888-989-8478

5. Picking up all pages rather just one

Firstly, check if the papers are wet. If not, then the next likely cause of this phenomenon can be that the paper separating pad has worn out. All you need to do is to simply order a new pad and install it carefully. As a precautionary measure, always fan the paper before putting it into the printer tray.

6. Not picking paper from the correct paper tray

Fixing this error is easy. Check if you’ve selected to print on the wrong tray by accident. If yes, then pick correct the paper tray source from the application. If this is not the issue, check to see if the paper sizes are as specified in the settings.

In case you are not able to resolve your HP Printer problems with these steps, then don’t fret! At HP Support Number, our HP Technical Support executives will diagnose and resolve your issues promptly. All you need to do is reach us at our HP Printer Support Phone Number 1-888-989-8478 for prompt online support.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Dec 31st 1969 18:00. Viewed 0 times.

Share on APSense

Comments