IO1 initialization failed error problem in windows 10 is caused by broken registry references or corrupt user data. It is also caused by the downloading unauthorized games and other forced commands on your Windows 10.
How to Fix IO1 Initialization Failed error in Windows 10
In this blog, you will get the Six methods to fix the Issue of IO1 Initialization Failed error in Windows 10:-
- Updates driver and Windows 10
- Run BSOD Troubleshooter
- Run SFC Scan
- Run DISM
- Check Hard Drive
- Command Prompt
1) Update Drivers and Windows 10
Drivers are removable parts of any operating system and allow the PC to access your system hardware. If your driver is not working in your operating system properly or it occurs an issue with your Windows 10 ten, you need to update your system to avoid BSoD error.
To download and update your system, you need to visit your official hardware website to download the latest version of your hardware. It is most important to update all drivers as much you can your drivers and always remember to download your drivers for the motherboard and all the major components.
Users can also use the device manager to download and update all the relevant drives, nut it can download by the user’s manually from the official hardware website.
Driver downloading is an essential part of your device, but keep your system up-to-date is more important for your device to run your system smoothly. All the updates have come with the new features and fie the budge and earlier issue of the previous software.
2) Run BSOD Troubleshooter
If you have updated your drive and still not get the solution of IO1 Initialization Failed error in Windows 10, then you need to use windows 10 inbuilt troubleshoots tools. These tools specially build to resolve the issue of the virus in the system and also deal with BSoD issues; maybe it is helpful for you to fix the IO1 Initialization Failed error as well.
Follow the steps to fix the IO1 Initialization Failed error in windows 10 via inbuilt troubleshooting tools:-
- Launch the setting application and visit the Updates and Security option.
- Choose Troubleshoot in the menu that appears on the left of your screen.
- Choose BSoD in the right panel and tap on Run the troubleshooter.
- Follow the steps that appear on the screen to complete your troubleshooter.
If the troubleshooter tool failed to resolve the issue of IO1 Initialization Failed error, then follow the next method given below.
3) Run SFC Scan
SFC scan is also one of the troubleshooter tools that are inbuilt in Windows 10. Command-line tools are part of the system file checker that essentially scans your device to find the problematic issue. If the command-line tool finds any corrupted file and any problem with your device, it can automatically resolve the issue.
Follow the steps to run the SFC scan in windows 10:-
- Visit the search and type cmd then open Command Prompt as an administrator.
- Enter (sfc/scannow) and tap Enter.
- Wait for a couple of moments until the process finished.
- If there is any corrupted file found, the SFC scan automatically resolves it.
- Now turn off the command Prompt and reset your PC.
If you are still facing the issue of IO1 Initialization Failed error in Windows 10 after promoting the above troubleshoot, then you need to do another troubleshoot as given below.
4) Run DISM
We will teach you the third troubleshoot to fix the issue of IO1 Initialization Failed error in Windows 10 via using Rub DISM tools. It is redeploying the devise picture and resolve the issue attached to the operating system.
Follow the method to Run DISM to fix the issue of IO1 Initialization Failed error in Windows 10
Method 1:- Standard way
- Right-tap on the start and open Command Prompt.
- Paste (DISM /Online /Cleanup-Image /RestoreHealth) in the field and then hit Enter.
- Wait for a few moments until the process is complete.
- Now reboot your system and try to update again.
Method 2:- Windows Installation Media
- Launch the Windows installation media.
- Right-tap on the start menu and then select the command prompt from the list.
- Now in the command field enter following command and Tap on entering each time:-
- dism /online /cleanup-image /scanhealth
- dism /online /cleanup-image /restorehealth
- Now write the given command and hit the Enter key:-
- DISM /Online /Cleanup-Image /RestoreHealth /source:WIM:X:SourcesInstall.wim:1 /LimitAccess
- Remember to change an X value with the latter that you have mounted with the driver while installing windows 10.
After the above process, reset your PC.
5) Check Hard Drive
If your hard drive is corrupted or damaged, then BSoD issue is more problematic. To find the issue you need to run the chkdsk, which scan all the issue in your device and resolve the problem of IO1_INITIALIZATION_FAILED
Follow the steps to run the chkdsk command in windows 10:-
- Enter the Advance startup.
- Choose Troubleshoot.
- Tap on Advanced options.
- Choose Command Prompt from the list.
- When the command prompt popup on your screen, type the following lines and tap the enter button each time:-
- bootrec.exe /rebuildbcd
- bootrec.exe /fixmbr
- bootrec.exe /fixboot
Now Restart your PC and check your problem is resolved.
6) Command Prompt
Follow the steps to fix: IO1 Initialization Failed error in Windows 10 using Command Prompt:-
- Restart your PC while it is booting.
- Repeat the process until the automatic repair process will be started.
- Select Troubleshoot
- Tap on Advanced Option.
- Hit Command Prompt.
- When the command prompts, start enters the lines given below and tap Enter each time:-
- cd /d c:windowssystem32config
- del default
- del sam
- del security
- del software
- del system
- copy c:windowsrepairdefault
- copy c:windowsrepairsam
- copy c:windowsrepairsecurity
- copy c:windowsrepairsoftware
- copy c:windowsrepairsystem
- exit
RDX Tango is an inventive person who has been doing intensive research in particular topics and writing blogs and articles on webroot.com/safe and many other related topics. He is a very knowledgeable person with lots of experience.
good very well write
Mar 12th 2020 00:13