How to Fix HP scanner issues cause blank scans or copies

by Mike Stater realfix247

Sometimes the HP scanner starts scanning or blank copies because of technical issues. To get the best quality scanning, you need to solve these problems once and for all. You can do this by taking appropriate support from HP Technical Support at all times. But before that, you should read the points mentioned below to eliminate these problems yourself read HP Scanner Support Blog.

Here are the steps you can take to easily remove blank scans or copy problems from the HP scanner:

Assign the scanning carriage to its original position:-

Inside the scanner, the scanning carriage may have lost its original position, which must be restored to obtain good quality scans.
Turn off the computer and then unplug the scanner from the power source. Leave the scanner unplugged from the power source for at least one minute.
Reconnect the power cord and restart the computer.
Try scanning again when the computer system has completely restarted. If the scanner is scanning documents normally, it is not necessary to continue reading this blog. Otherwise, go to the next point.

Make sure the shipping lock is completely disconnected :

A shipping block is attached to the scanner at the time of shipment to avoid damaging the scanning carriage. Lock and unlock the shipping lock several times to make sure it is completely disconnected.
You can see the installation poster that came with your scanner to know the instructions to unlock the scanner. Or you can also take assistance from the HP support team.

Be sure to use the correct power source :

Always use the correct power cord with the built-in power supply for each model of the HP scanner. A power cord with an integrated power supply is similar to an electrical cord with a small black box attached.

There are some reasons why the scanner shows a completely blank preview of the scan. These are:

Using a universal power supply
Power supply from another device, such as another scanner model or printer
Using a defective power supply

If the problem of scans or blank copies in the HP scanner still persists, even after following these steps, we suggest you accept support from the HP printer. Here, the professionals available will surely guide you to the proper steps to eliminate all your problems.

Read About More HP Support Assistant, HP Printer Assistant, Printer status offline to online, USB Port in Your Hp Laptop is not Working