How to Deal with the Leakage in Water Tank of Cummins Diesel Generator Setby Dieselgenerator Tech ***
The water tank is an important component of the Cummins diesel generator set. The Cummins diesel generator set generates a lot of heat during long-term operation, and the water tank mainly plays a role in cooling and dissipating heat. If the heat dissipation effect is not good, the Cummins diesel generator set will be damaged due to overheating, and may even cause failure in producing black smoke. This article will focus on analyzing how to deal with the leakage in the water tank of the Cummins diesel generator set.
We all know that, in addition to mechanical damage, most of the causes of water leakage in the cooling water tank of Cummins diesel generators are caused by corrosion. For different causes of water leakage, users can deal with it as follows:
1. When it is found that the inlet and outlet hoses of the Cummins diesel generator's cooling water tank have a little rupture and leakage, you can use tape or a cloth coated with soap to tightly wrap the leaking area, and then tie it with a thin iron wire; you can also wrap the crack with a plastic film first If there is a plastic tube with the same diameter, it can also be temporarily used to replace the damaged rubber tube.
2. When the upper and lower water chambers of the radiating water tank of Cummins diesel generator set leak, you can plug the leaks with cotton cloth or wooden blocks and tie them tightly, and then coat the surroundings with soap for temporary use.
3. When the core tube of the cooling water tank of Cummins diesel generator set is ruptured and leaks slightly, soap or water tank leaking agent can be used to repair it. Practice has proved that when the crack of the water tank is below 0.3mm, it is very effective to repair it with a plugging agent. At this time, only need to put the plugging agent into the water tank, and with the flow of cooling water, the leak can be quickly repaired.
4. If the water tank of the Cummins diesel generator set has serious water leakage, use pliers to flatten the core tube at the leaking point to prevent it from leaking; you can also cut the leaking part of the core tube first, then clamp the fracture flat, and then use soap or 502 glue Stick to the leaking part; if the above conditions are not met, some shredded cigarette tobacco can be put into the water tank, and the pressure of the water circulation is used to block the shredded tobacco ball in the leaking part of the radiating water tank for temporary first aid.
The above is how to deal with the water tank leakage of Cummins diesel generator set by Dingbo Power for everyone. Water leakage in the generator set will directly lead to more serious consequences. Therefore, users must be cautious when using Cummins diesel generator set. If the water tank leaks, it must be inspected and dealt with in time. If you need technical assistance, please contact Dingbo Power by firstname.lastname@example.org. Guangxi Dingbo Power Equipment Manufacturing Co., Ltd., as a leading diesel generator set manufacturer, can provide you with one-stop service for unit design, supply, commissioning and maintenance.
Created on Mar 5th 2023 18:49. Viewed 129 times.