How Do I Configure My EPSON Receipt Printer to Print Online Orders?
by Printer Technical support number Printer Technical Support NumberEpson is the
most popular brand name and now it has been esteemed when it comes to receipt
printers. Epson Receipt Printers is a fully featured thermal printer which
delivers fast receipt printing speed and is backed by the industry’s
best-in-class reliability in high volume environments. They are easy very easy
to set up, the hardware and printouts are good quality. It doesn’t take time to
maintain and they last a long time.
Therefore, if
you desire to be able to print Open Dining order notifications to your Epson receipt
printer, though, you require utilizing Epson's software, as the Windows
automatic discovery and installation of your printer just won't cut it. You need
to download and install the Epson Advanced Printer Driver (APD), the steps are
defined as below. Then just walk through the steps which given in this article
in order to configure Epson receipt printer to print online orders.
Before Getting Started:-
·
First of all, check that the Epson printer is connected
directly to your computer or over a local network, and is powered on.
·
Next, you will need to verify that the printer isn't
already installed on the Windows computer. To verify this thing, you will need
to visit your Windows Control Panel in order to verify if the printer is listed
on the “Devices and Printers” page. If it's not, then its fine, but in case, if
its then you must delete it.
·
Make sure that deleting an existing printer could affect
a current print configuration with your restaurant's POS system, for example.
·
Now you should properly follow the next steps to
installing the Epson APD.
Installing the Epson APD:-
·
The first step for you is to download and install the Epson
APD, you can do this thing by visiting the official website or visiting the
internet.
·
Download “.zip format”, you will need to extract the
files before you can effectively run them.
·
After extracting the files, double-click on the file
named "APD_455dE.exe" to begin installation of the APD.
·
When the POP up appears, then click the Yes button to
continue.
·
Then you will enter a "Welcome" window.
·
Hit the "Next" button.
·
In the “License Agreement” window, click the option to
accept the terms, and then click "Next" button.
·
Next, you will be prompted to choose a setup type. Choose
"Minimum (Recommended)" radio button option, which is selected by
default, and click the “Next” button.
·
Then a “Printer Configuration window”, you will need to
hit the “Add” button on the right side of the window, which will take you to
the Add Printer window:
·
Hit on the "Select driver" dropdown and scroll
to choose the “Epson TM-T88IV Receipt" item in the list and click on it.
Same select "Printer name" dropdown to whatever name you want.
·
Select one proper “Port Type”, fro, options, Parallel
port: Serial port, Ethernet port, or USB port.
·
In the "Set as Default Printer" drop-down the
list, you only need to select option Epson receipt printer to be the main unit
for ALL print jobs at your location.
·
Hit the "Next" button.
·
In the “Parallel Port Setting” page, you will need to Setting
up a parallel port-LPT Port Section- you will need to hit on the drop-down list
to choose the port, either it could be LPT1, LPT2, LPT3, and so forth. You may
need to select each one and save the configuration change
·
After you have verified/selected your LPT port, then hit
the "Next" button.
·
The above step will bring you back to the “Printer
Configuration” window, which will now list your newly installed printer.
·
Click the "Next" button, which will bring up a
"Start Copying Files" window.
·
Hit the "Next" button, which will begin the
driver installation process.
·
Hit the "Finish" button
·
If your Epson printer is of the serial port variety, you
will need to create a Serial port, and click “Next”. After then you will be
presented with the Serial Port Settings window.
·
Select all the drop down one by one in the list and save
the configuration change information until you find the one that successfully
prints out a test page and once you have the proper configuration and then
click “Next” button.
·
Now you will then go through the remaining setup windows,
as above in the "Create a Parallel port" section. Follow the process
like select “Printer Configuration" window then click “Next”, choose
"Start Copying Files" window then click “Next”, choose "Setup
Status" window and then wait for it. Then the final window, appear then
click “Finish”, then you're all done.
·
Then, create an Ethernet port, in the “Ethernet Settings
window” setting, you'll need to know the IP address of the Epson printer if you
want to connect to. IP addresses for local network devices usually start with
"192" or "10".
·
Once you have the IP address entered, click “Next”.
Follow the remaining setup windows in the Create port" sections, as above.
·
Create an Ethernet port.
·
When all thing completed, then you will be ready to rock
'n roll.
Dial Epson Technical Support Number:-
If you face
any issue to following the above steps, then call at 1-800-213-8289 Epson Technical
Support Number, which is available 24x7 days to your help. We are reliable and
versatile support service provider and giving excellent Epson support &
services to the customers for their Epson difficulties. A team of our
well-experienced and certified technicians can fix your all kinds of Epson issues
in a less time. We provide support through various modes, such as Online Live
Chat, Email, and Phone support. Hence, connect us anytime to get immediate help
for Epson printer’s queries.
Author Bio:-
I am John, a
senior content writer and I have various contents on Epson printers. So, if you experience any issue with an Epson
printer, then connect us now for help & right guidance.
Sponsor Ads
Created on Nov 3rd 2017 02:12. Viewed 567 times.