How Can You Save on Brother Toner Cartridges?

i. Shake-n-Save

The ideal way to save on Brother toner cartridges is to get as much life out of the cartridges. If you receive a "toner-low" message from your laser printer, then you have to pop out that toner cartridge, and bump it against your hand palms, and shake it for full 30 seconds. Pop the toner back and check whether the message disappears. The dust accumulated inside the toner cartridge could stick together and be the reason to clump up. This "bump and shake" procedure will release the clumped toner and allow your printer to check the real level of the toner remaining in the cartridge. Despite the low toner message, you are bound to get all your desired pages printed out of the Brother toner cartridge when you release the toner dust blocked inside.

ii. Popping Out, Pushing in and Unplugging

Simply popping the toner cartridge out of the laser printer, waiting for a moment, and pushing it back again is the simple trick to be applied on the Brother printers displaying a "low toner" warning. This process helps in resetting the printer's memory and instructs the machine to properly look again at it at the toner levels. As a result, you can get more out of the Brother toner cartridge.

There is even an easier trick. The printer must be reset by turning the printer off and on again, or unplugging it, and plugging it back in.

iii. Tick-Tock the Toner 

Different from the ink cartridges, the toner really has no expiry date. You can stock it up when you find a bargain on cartridges - the toners will not turn bad. To extract more life out of the toner, be strict about the toner levels, and think carefully before printing, whether you really need the prints or not. Pre-planning the needed print jobs carefully saves time, ink, toner, and papers.

iv. Keep it Absolutely Clean

Dirty and dusty printers are responsible for the toner cartridge efficiency to suffer. Dusting the printer to keep it clean and doing a nozzle check every time the cartridge is changed is enough.

v. Tale of the Tape 

A few Brother printer ink cartridges are suited with the sensors along with their housings, it could look similar to a tiny hole on the solid design. The sensor sends a message to the printers that the ink is empty. In turn, the printer is not going to operate until the sensor is deactivated. If you have to get more prints from the Brother cartridges, follow the simple trick of using electrical tape. Use it in small pieces for covering the cartridge sensor. After activating the printer, check whether it is recognizing the toner level.  A few Brother Printers quickly respond to this particular strategy, and trying it out will give you success.

vi. Purchase only Genuine Brother Toner Cartridge 

While the toners have to be eventually replaced, do not fall for the cheap price options. For the printer to run as smoothly as possible, make sure to buy only the Brother toner cartridges. These toner cartridges are apt for replacements as these do not leak, hold no complaint records causing paper jams, and never prints any poor quality pages. Cleanliness and maintenance extend its life shell.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 7th 2020 06:12. Viewed 528 times.

Share on APSense

Comments