How Are Acrylic Frames Constructed?

by Reg Burn Plastic Fabricator

Acrylic frames are great creations that can be used to display personal artworks as well as commercial graphics in an attractive way. With their bold stand-offs and clean lines, these plastic products are worth every penny. Sometimes, they may cost a bit more than usual, but that’s only because dealers of Perspex in Sydney have to put in some serious effort for making flawless acrylic frames. In fact, the entire construction procedure is nothing short of a prodigal task. Don’t believe it? Well then have a look at the process yourself, which has been described below in detail:

First of all, two proportionately cut Perspex sheets are taken and placed on top of each other. Then, they are secured using leather pieces and vice grips for protection.
Next, the expert takes measurements of the holes that he or she would need to punch later on for installing stand-offs. The markings made are kept as accurate as possible so that there is enough place left between the artwork and the bolts.
A long metal stake is now heated over a flame for around 2 to 3 minutes until it becomes sufficiently hot. Once heated up, the stake is used for punching holes into the Perspex where the stand-offs would be. Some professionals prefer a drill machine over a hot stake, but drilling holes into acrylic sheets necessitates the hands of someone very experienced. Also, the risks of cracking or breaking are too much.
After making the required holes, the professional uses a blunt instrument for scooping out the molten acrylic. Upon completion of this task, the protective inner layers of plastic are removed from the Perspex sheeting.

So this is how acrylic frames are actually constructed. Once a frame becomes ready, it is delivered to the client and then the artwork or graphics are secured on it using acid-free tape or photo tabs. The protective outer layers are peeled off and the standoff bolts are fastened in place. The person mounting the frame may need to follow some instructions provided with the standoffs for hanging the item properly.

While looking for a plastic fabrication company to have acrylic frames constructed, it is better to do some research and find out who are the most efficient service providers in market. At least 3 professionals must be considered to compare charges, efficiency, punctuality and experience. Going through the client testimonials of each plastic fabrication company can help a great deal in choosing the best one.