Front Axle Shafts and Their Types – Important Part of Your Vehicle

Are you from the automobile industry? If you are, you must have heard about the axle shafts. These shafts help the engine to rotate the wheels of the vehicles. The Axle shaft plays a pretty vital role in the automobile industry as it carries the entire weight of the vehicles. The axle shaft mainly represents two parts- the axle and the shaft. The axle is mainly a rod. No matter which brand's car you buy from the store, every vehicle comes with an axle and shaft. 

There can be a number of axles in your vehicle, though the axle number is totally dependent on the type of car. It has been seen that the cars have two axles and these are used to rotate the wheels. The axle number is proportional to the number of wheels. If you wish to count the number of the axle for your vehicle, you should count the pair of tires only. 

Types of axles

It is evident that axles are a pretty important part of vehicles. The axles come in only three types. There are front axle shafts, rear axle shafts, and stub axle shafts. Let's know about these axles a little.

• Rear-axle- The rear axle generally supplies power to the driving wheels. The rear axles rotate with the vehicle's wheels in maximum cases. The rear axle can be divided into two halves. That is why many people call the rear axle the half shafts. 

• Front axle- As the name suggests, the front axle is basically situated on the front of the vehicle. Believe it or not, the front axle helps the vehicle in steering. Also, whenever your vehicle is on an uneven surface, the front axle shafts save the vehicle and the engine. The front axle shaft also has a number of parts. These are the beam, the track rod, the stub axle, the swivel pin, and so on. The front axle shaft suppliers make it as sturdy as possible. The manufacturers generally use carbon steel or nickel steel for the construction of these front axle shafts. 

• Stub axle- The stub axles are also attached to the front of the vehicle. The front axle shaft manufacturers use kingpins to connect the stub axle to the front axles. 

These days, a number of factories are manufacturing axle shafts all over the world. They are trying to provide high-quality axle shafts. Another thing, these manufacturers are showing pretty fast production and affordable rates for their axle shafts. These axle shaft manufacturing companies are pretty sustainable in nature. If you are looking to replace the axle shaft of your vehicle, you can contact these axle shaft manufacturers at any time. They will allow you to order the axle shafts in bulk as well. A particular axle shaft, if used properly, can last longer than a decade. So, if you want to save your hard-earned money, you should learn about axle shaft maintenance as well.