Elantra CD modified MP3 decoder installation AUX

by Molis Kary dwe Elantra modified AUX, the way to install MP3 player. To be sure, this section can be perfectly adapted CD AUX, almost no difference between the original AUX. But only converted AUX is not my ultimate goal, my goal is to be able to play Elantra direct U disk or memory card, the first in TB bought two MP3 decoder board. 1. First, the MP3 decoder board picture, bought two kinds, one with LED digital display, silver bezel, and the other without a display, black panel. The reason to buy two kinds, the installation location was not identified, did not know what it means to look better, or better change, anyway, not worth the money, buy one does not matter. First determine the installation location, right in front of the co-pilot of a shell, dimension happens, the following effect mk4 lowering coil springs kit‎ is put to the map, there is no connection, nor fixed. This 2 decoder board can say exactly the same function, you can play USB and SD media, with FM radio, with infrared remote control, with a display that section in which a multi-function, built AUX input (currently not used) . Note that this either-AUX AUX, AUX mentioned here refers to the AUX CD machine. 2. modification, from demolition to start The first step in the control plane split box. Need to remove the ashtray, remove two screws inside, at the top of the back side of the dashboard as well as two screws mk4 golf lowering coil spring, should be removed. FIG red circle marked location. Then we need to operate the violence from the beginning of the ashtray, pull out the surface from bottom to top box (which a lot of clip fixed) From the surface box process, according to the lifting angle, unplug need another cigarette lighter socket of the external power supply plug, clock module, the emergency switch connector, and finally the rear fog lamp, plug the meter brightness adjustment, a total of six plug surface box completely relieved, then remove four screws to adjust air conditioning panel vw lowering springs, remove the four screws on the way also a CD player. Remove and then adjust the air conditioning panel is intended to remove the CD player, CD player positioned below a metal splint, air conditioning tuning panel in the way. A little out of the CD player, the CD player behind the two plugs (plugs are power + speaker and antenna connector) pulled out. At this point, CD player can get back the house dismemberment.

Sponsor Ads

• Ad Space Available - Rent it Now!

Created on Dec 31st 1969 18:00. Viewed 0 times.

Comments