Easy Ways To Clean Drum Unit In Your Brother Printer

by David M. Marketing Executive

After purchasing your brand new Brother Printer if you want to know the exact process to set it up, then you are in the right place. The setup process of the printer is really simple on windows. In this section, we are going to provide you the quickest and easiest way for the Brother printer setup. Therefore, go through the article carefully. Below are the steps provided by Brother Inkjet Printer Support Number follows them to complete the process of setup. Configure Brother printer team will help you in fixing the problem with the below simple steps.

First of all, you need to open the front and the back cover of the printer while it’s in working condition i.e. the machine should be on.

Then, make sure that the green levers on both ends should be in an upward position, now you have to click the go button five times.

The printer machine will begin the drum cleaning process, examine the light indicator to confirm it.

Now, you need to take an A4 paper, set the manual width according to the size of the sheet, unless the machine will halt the drum cleaning and eject the paper instead.

Then, you have to open the paper slot and hold the paper with both hands and let it roll inside the printer. Free the paper once you feel it getting pulled from the device. Keep in mind the paper should be neat and without any wrinkle or crease otherwise, it is going to get stuck inside the machine for sure.

Do not get alert and stop the process by hearing the harsh sound coming from the printer as the drum getting cleaned. The noise is the indicator of the cleaning process as the drum rotates backward to honor your command.

There is another way to do it manually. In this process, switch off the printer and take out the power cord, etc.

Then gently open the front cover and take out the drum and the loose toner by pressing the green lock level on a piece of paper placing it on an even surface.

Next, you need to clean the drum with a cotton swab, lint-free paper or clean it wipes, etc, just keep in mind anything you use should be alcohol-free.

Lastly, you have to place the toner back in its position. Place the front cover back on the machine. And try testing it by taking out sample prints.

In case, you are still facing any problem with your brother printer even after following and executing the steps which are mentioned in the above section. Then feel free to connect with our technicians. Our experts are ready to provide the best and secure solution in minimal time without any hassle. We are available 24x7 to help you in resolving common problems of brother device. Contact Brother Printer Customer Support +(1)-844-489-7268 Number which is toll-free.