Debunking the Common Myths about Deck Staining you Should Know

Do you want your wooden decks to look new and refreshed again? Along with cleaning, sanding and polishing the hardwood, you can't ignore the need for wood staining. Staining the wood literally gives a makeover to your deck.

However, some solid misconceptions are there regarding the deck staining that you need to know and get rid of to make sure that you can enjoy the benefits of this service without any doubt.

If you are not so sure about the benefits of deck staining, consider having a chat with the professionals regarding it. They will let you know how you can actually safeguard your expensive wooden deck by opting for deck staining service as early as possible.

Here are the myths or misconceptions you should overcome.

Misconception 1: It Takes Months to Dry Out the Pressure Treated Wood before the Staining Process

The first misconception regarding the process of deck staining is, of course about the timing of the treatment. The widespread myth suggests that if you have opted for pressure cleaning your deck as a part of the deck maintenance, you certainly have to wait for months as because, it takes months for the wood to get dry completely.

The truth is entirely the opposite of what the common belief actually is. You can opt for deck staining in Perth as soon as the wood starts to become dried up. Moreover, if you give too much time in between drying and staining; as a result, the wood pores will get damaged. So, don't delay much for the staining to be done.

Misconception 2: Installed a New Deck? It’s Ready to Get Stained

Not always! The experts of deck maintenance have always suggested that you just can’t take the initiative of staining new deck without checking whether there is a need or not. Have you heard of the term ‘mill glaze’? Usually, the combination of pressure and heat is the reason behind the surface can have this particular syndrome.

Run a test to make sure that your wooden deck is ready to be treated. Drop a little bit of water on the surface of the wooden deck. If it is found that the water is taking time to get absorbed inside the wooden plank, it means that it has got a mill glaze. You don't need to go for staining readily. Instead, going for the service of floor sanding in Perth will do the work.

Misconception 3: Oil Based Deck Staining Material is the Only Solution

You must have heard about this misconception quite often, but in reality, oil-based deck staining has turned obsolete in recent times. The experts are suggesting that water-based staining material are much more effective in this case. Also, some of the specialists also suggest that it takes a long time in the oil-based stain application. Therefore, oil-based deck staining is not the solution anymore.

So, these are the top 3 misconceptions about deck staining that you have believed in all this time. Now, as you have found the reality, find the best professionals in the market and refurbish your wooden deck once again.

Sponsor Ads

• Ad Space Available - Rent it Now!

Report this Page

Created on Jul 22nd 2019 03:03. Viewed 497 times.

Share on APSense

Comments