BGA Rework CNC Polishing Engraving Station For Iphone PCB Repair

by Nancy N. DIY diagnostic and car repair tools

BGA Rework CNC Polishing Engraving Station For Iphone PCB Repair

User friendly, do not need to connect the computer.

IC Remover is smart CNC Engraving Machine, BGA chip is difficult to be removed by-de soldering, uneven heat will damage the surrounding chip and PCB layers, heat especially will melt surrounded BAG chip's solder point and cause short circuit.

Engrving the whole chip and show the pcb pads is the best method, but PCB and chip may have tilt angle, it cause the engraving difficult to just cut a flat area.

Our Smart IC remover has detector to check 4 corners of chip before engraving, we can then calculate the chip's tilt angle, Our system can run without PC, but just control the LCD touch screen we can easy to remove BGA chip.

Dust Cleaner

Grinding cutting powder material is carbon power and heavily, work for a long time in such an environment, with large physical harm.

with smart dust cleaner system, no longer wear masks the grindstone.

level of medical vacuum cleaner, strong suction, low noise, suitable for long time use.

News: The factory has other custom in the mobile phone models motherboard exitsting templates support series: 4/4s/5/5S/5C, 6/6S/6SP(two)
Pad series: PAD 2/3/4/5/6, PADmini 1/2/3/4( whole series of three bolck)

Note: custom templaate need to buy separately, the machine with a 4-5s template.