Best Methods for Deep Cleaning Commercial Carpets

by 212 Carpet A Knowledge Based Commercial Flooring Company!

Cleaning carpets in commercial areas requires using specialized products and equipment to ensure deep cleaning and quick drying to minimize disruption to walk-through areas.

Professional carpet cleaning companies in New York are best equipped for the job because they use highly concentrated cleaning products, sprays, and protectors, as well as high-powered industrial machines to remove the deepest dirt and stains.

This blog will look at some of the best methods experts use to deep clean commercial carpets in New York.

The Preparation

Depending on how dirty the commercial carpet is and how quickly the carpet area needs to be usable again, you can use different carpet cleaning techniques. However, before you get to that, you must prepare your carpet.

Before starting the commercial carpet cleaning process, use an industrial vacuum cleaner to remove surface dirt, sand dust, and soil from the carpet. Spots and stains can be pre-treated with chemical agents explicitly designed for that stain.

You can then spray the carpet with the cleaning agent recommended for the type of carpet laid. This cleaning agent penetrates deep into the carpet to remove oils and grease. With Counter Rotating Brushes (CRBs), clear away surface dirt and ensure the cleaning agent has worked deep into the carpet.

After your prep work, you can use one of the following commercial carpet cleaning methods on the carpet:

Hot Water Deep Cleaning Extraction Method

This method is most widely used in industrial settings.

A deodorizing solution is first jetted onto the carpet at high pressure to help loosen stubborn dirt and soil particles. The high-powered machine then extracts the hot water, as well as the dirt and stains, leaving a clean, fresh-smelling carpet that dries quickly.

Specially designed tools are often used to clean into the corners and edges of the carpet, resulting in a deeply cleaned carpet.

Low Moisture Carpet Cleaning

This cleaning method is excellent for areas that cannot be wet cleaned. For example, if an older carpet with jute backing gets too wet, the fibers are likely to tear.

Low moisture carpet cleaning is a cost-effective method of cleaning carpets and can prolong carpet life, especially if a maintenance plan is in place.

Low-moisture cleaning uses less moisture, usually 5% of the amount of water used in extraction cleaning.

An agitation machine is used to work a moist cleaning agent into the pile, which is then thoroughly vacuumed after drying.

Encapsulation Process

This cleaning method uses soft rotary brushes and the bonnet buff method (an adaptation of hard floor spray buffing to carpets).

A rotary machine's primary function is to work crystallizing shampoo onto the carpet. When the chemicals dry, they crystallize and encapsulate the soil, making it easy to remove with a vacuum.

While there are many carpet cleaning methods out there, these three methods cover most requirements for commercial carpet cleaning in NYC.

Since it is very easy to 'over wet' carpets and completely ruin them, you should contract the services of an experienced commercial carpet cleaning company. Thanks to their experience and expertise, they will ensure your commercial carpets are thoroughly cleaned and last for many years to come.

Sponsor Ads

About 212 Carpet Innovator   A Knowledge Based Commercial Flooring Company!

3 connections, 0 recommendations, 81 honor points.
Joined APSense since, September 3rd, 2020, From New York, United States.

Created on May 25th 2021 02:55. Viewed 311 times.


No comment, be the first to comment.
Please sign in before you comment.