Global Warming

by Keith Perkins

One of the most significant factors leading to global warming is emissions from internal combustion engines. Manufactures have not been able to make an engine that will burn fuel completely. It is the unburnt fuel that leaves carbon deposits, and creates sludge in your engine. Whatâ€™s left goes out the exhaust adding to the pollution we are all so concerned about.

No one person can do a lot about industrial pollution, but we can all reduce our footprint at home. One way is by keeping automobiles and all of your garden equipment (lawn mowers, weed eaters, chain saws, your boat, atv, motorcycles etcâ€¦) maintained and running efficiently. Just changing the spark plugs and air filters can help significantly. Donâ€™t buy more fuel than you will use in a short period of time, gas goes bad and engine combustion will suffer.

Everyone is looking for ways to save money at the pump, and there are a multitude of products available that will help, injection cleaners, octane boosters, carbon cleaners, water removers, and fuel additives, so and so on, all are designed to help with one problem or another. You could spend 2, 4, and 6, up to 10 dollars or more per tank of gas adding everything that would get you an extra couple of miles down the road. That would not be very economical, not to mention all the additional chemicals that could be in you exhaust.

Solution:

Increased combustion of the fuel will increase the horsepower of your engine, lower octane requirements, reduce or eliminate carbon deposits in your engine, reduce exhaust emissions, all while increasing your Miles Per Gallon.

*I was recently introduced to a product that does all this*
It is a fully documented, product with 25 years of results from highly credible, verifiable sources.

Whether you are interested in creating an income
Wish to learn how to save on your fuel bill
Or just do something for our environment

I encourage everyone to please check into this product.

NanoTech eeFuelÂ® is a highly concentrated fuel additive utilizing high-tech liquid nanotechnology. Inside the fuel tank, NanoTech eeFuelÂ® builds an exceptionally stable three dimensional lattice structure consisting of sub-microscopic nano-clusters, all evenly distributed within the fuel. These nano-clusters are physically, chemically, or catalytically active depending on the stage of the combustion cycle.

When NanoTech eeFuelÂ® nano-clusters reach the engine and begin to burn in the combustion chamber, they rapidly gain heat and literally explode into steam. These steam explosions generate two very significant benefits:
Larger liquid fuel droplets are broken down into smaller and more readily vaporized sizes.

Increased turbulence improves localized mixing of air/fuel vapor.
When exploding nano-clusters reach the surfaces of the engine combustion chambers, they create a very gentle steam cleaning action that steadily removes any accumulated deposits. A clean combustion chamber gives cooler combustion, lower emissions, cleaner lubricating oil, and reduced engine octane requirement.

Keith Perkins
Independent Distributor