10 Important Tools For Concrete Finishing

by Zane Andres Seo

When you are going for concrete finishing, then you need to be patient while working. Irrespective of how simple is your task, you need to use the right tools and equipment that will make your work easy.

Moreover, if you are looking to get rid of the NYC sidewalk violation, then you should get in touch with the expert company in your area to get satisfactory results.

In the following blog, we are going to tell you about the ten important tools you need for concrete finishing:

1-Power Screeds

When the concrete will be poured, then a screed is used to make concrete smooth and pull out the excess back of the form. According to the size of your pour, you can use a wooden screed board or a power screed. When you will be using the vibratory screed, then you will get better results and it will save your time as well and you don’t have to worry about back fatigue. You might consider selecting the wooden screed board if you are having a too narrow slab for a power screed. Note that if you are going to use the wooden board, then you should pull the excess concrete back and go back to the concrete slab more than the time when you are sliding the 2x4 screed board back and forth as you will be pulling.

2-Concrete Finishing Brooms

A broom is utilized when you want to increase the friction and want to reduce the slippage. It is an old concrete finishing technique and this will be executed differently. When you will be changing the directions to obtain the distinctive look from the artistic patterns to rough and decorative finished, for this steel broom will be used.

3-Bull Floats

It is a wide-bladed tool that is fixed on the long handles that will be used for leveling the void, smooth surfaces, and ridge for trowelling. Remember that, floating should be done before the moisture starts to appear on the surface. This is supposed to be instantly carried out after the screening.

4-Magnesium Floats

It is a small-sized float. It is having a small handle and it will be used to work on the small areas and the edges.

5-Concrete Edgers

This is used when the concrete starts to lose moisture and starts to become stiff. It is having an L-shaped edge that will help you in setting the concrete separate from the board.

6-Green Concrete Saws

This tool is used for creating concrete joints that will prevent you from random cracking. The saw will be useful when you will have to face a problem and the dried slab should be cut. According to the good rule of thumb, the space between the joints should not be more than 2 to 3 times the slab thickness.

7-Concrete Mixers

This is used for mixing the cement, gravel, sand, and water to form concrete This is used for small projects and patchwork.

Other than this, you can use:

8-Concrete sprayers

9-Plate compactors,

10-Power Trowel:

• Ride-on power trowel

• Walk-behind power trowel.