The difference between the bend and elbow By yaang.comby yane Yang Sales Manager
Bend and elbow the most basic difference is that the elbow is relatively short. R=1 times to 2 times the elbow, and then a large multiples of the bend. In the production process of cold bend can be readily used straight pipe with a straight pipe bending machine, a one-time completion of the two anti-corrosion. But the elbow to the manufacturers custom, to do anti-corrosion, long order cycle. Elbow price than the bend to high but the price is than the bend to a much higher, without doing anticorrosion treatment bend is easy to damage is well-known, but because of cheap price in some of the requirements are not very high engineering use very much.
Bend to manufacturers custom, to anti-corrosion, long order cycle. The cold bend pipe can be bent with the ready-made straight pipe. A one-time completion of the two anti-corrosion. Cold bend pipe construction technology has an oil standard, west east gas transmission company standards. But open area with elbow is OK, only consider the cost, hot bending bend, cold bending can, of course, is high cost of elbow. Sometimes in a narrow zone must be used for elbow, such as stonework section pipe trench, because of the small elbow radius of curvature, generally for 6D, and the elbow for 40d.
Established in 2008, Zhejiang Yaang Pipe Industry Co., Limited is a professional organizer and one-stop-shop supplier for steel piping system products, including steel pipe and tube, forged flange and fittings, butt-welding pipe fittings, elbow, tee, reducer, stub end, gaskets, fasteners, valves, Sanitary Services etc. in China. We have devoted to providing the best solutions of steel materials and industrial equipment for our respected customers.
We supply not only commonly used stainless steel materials (SS304/L,SS316/L,SS321), but also duplex and super duplex steel 1.4547, 1.4462, 1.4410 (S31254,S31803,S32750,S32760), special austenite stainless 310S, 347H, 317L, 904L... Yaang products are widely used in Shipbuilding, Nuclear power, Marine engineering, Petroleum, Chemical, Mining,Sewage treatment, Natural gas and Pressure vessels and other industries.
Yaang products are according to national standard GB/T12459, GB/T13401, U.S. standard ANSI/ASME B16.9, ANSI/ASME B16.5/B16.47, ANSI/ASME B16.11, ANSI/ASME B36.19M/ B36.10M, ASME B16.20,British standard BS,Germany standard DIN,Japan standard JIS..., The purpose built nonstandard or special use products as per customer's demand, we will try our best to satisfy it.
To be a reliable supplier, providing high quality products,very best service and support, Yaang will do that always!
Source: Zhejiang Yaang Pipe Industry Co., Limited (www.yaang.com)
Created on Dec 31st 1969 19:00. Viewed 0 times.