Operating Principle and New Characteristic of Screw Oil Press
by Lili C. sales representativeOperating Principle of Screw Oil Press
Oil bearing materials from hopper to pressing chamber, when the screw expeller pressing running.
Screw shaft rotating in the cage, which push the oil material into the
machine for pressing. On the one hand, raw material is keeping moving
all the time in pressing chamber. Under the high pressure of pressing
chamber, there is great friction drag between raw material and screw
shaft, also between feedstock and press chamber. Thus among those raw
material will produce friction drag and relative movement. On the other
hand, because the circle diameter of screw shaft root gradually
thickening and screw shaft distance little by little reduce. When screw
shaft is rotating, it pushes raw material strongly and rolling over
outward at same time. Thus there is relative movement among every raw
material particle. The quantity of heat from friction drag satisfies
technology in the pressing, contribute to thermal denaturation of
protein in the material, improve the oil extracting rate in the
meantime. Either big scale or small scale of screw oil expeller, they
have similar theories in screw expeller pressing.
|
The New Characteristic of new multifunction oil press:
1. High work efficiency, capacity up to 150-250KG per hour.
2. Better configuration, complete electrical device.
3. Vacuum filtration, more pure edible oil.
4. High oil yield.
5. Wide application: great machine for pressing all kinds of oil bearing
material, such as peanut, sesame, rapeseeds, flax seeds, sunflower
seeds, etc, more than 20 kinds of oil crops.
Add:Structure Chart of Screw Oil Press
|
Note: 1. Feed Section 2. Gear Case Section 3. Press Cage Section 4. Screw Shaft Section 5. Body |
Old Screw Oil Press
|
Note:1. Electric Cabinet 2. Feed hopper 3. Vacuum Oil filter |
Sponsor Ads
Created on Dec 31st 1969 18:00. Viewed 0 times.