|
Gangue Lump Coal Crusher
--from Zhenyuan Machinery, we since 1964!
The Lump Coal Crusher in this table
represent a typical sizer and are dependent on the tonnage rate and
tooth configuration required.
Do Very Well In:
Coal / Ore / Mine / Mineral Separation /Ore Dressing
Different Teeth for Different Material:
  
Feature:
1. It
is not too high, so it not only suitable for the ground mining, but also
do very well in underground mining. It can crush ore in mine.
2. The crusher’s volume is small, long service life, easy to maintain.
3. Low over crushed rate, easy to keep the material’s block shape.
4. Crushing and screening at same time, so the crusher is grading crusher.
5. High strength alloy steel shafts and teeth.
6. Fluid Coupling - Allows loaded startup and affords torque protection to the machine
Technical Parameters:
|
140 Series grading teeth-roller crusher for coarse crushing |
Model
Specification |
2PLF-140/150 |
2PLF-140/200 |
2PLF-140/250 |
2PLF-140/300 |
|
Inlet Size(mm) |
<=1500 |
<=1500 |
<=1500 |
<=1500 |
|
Discharge Size(mm) |
<=300 |
<=300 |
<=300 |
<=300 |
|
Capacity(t/h) |
1300-2500 |
1700-3800 |
2200-4600 |
2700-5500 |
|
Single Driven Type Motor Power(kw) |
315-355 |
355-450 |
400-560 |
450-630 |
|
Dual Driven Type Motor Power(kw) |
2*(185-280) |
2*(200-315) |
2*(220-355) |
2*(250-400) |
|
120 Series grading teeth-roller crusher for coarse crushing |
Model
Specification |
2PLF-120/150 |
2PLF-120/200 |
2PLF-120/250 |
2PLF-120/300 |
|
Inlet Size(mm) |
<=1200 |
<=1200 |
<=1200 |
<=1200 |
|
Discharge Size(mm) |
<=300 |
<=300 |
<=300 |
<=300 |
|
Capacity(t/h) |
<=1500 |
<=2000 |
<=2700 |
<=3300 |
|
Single Driven Type Motor Power(kw) |
315-355 |
355-450 |
450-560 |
560-630 |
|
Dual Driven Type Motor Power(kw) |
2*(132-185) |
2*(160-220) |
2*(185-250) |
2*(200-315) |
|
100 Series grading teeth-roller crusher for coarse crushing |
Model
Specification |
2PLF-100/160 |
2PLF-100/200 |
2PLF-100/250 |
|
Inlet Size(mm) |
?700 |
?700 |
?700 |
|
Discharge Size(mm) |
50-150 |
50-150 |
50-150 |
|
Capacity(t/h) |
280-850 |
350-1000 |
500-1500 |
|
Single Driven Type Motor Power(kw) |
160-200 |
160-250 |
200-315 |
|
Dual Driven Type Motor Power(kw) |
2*(90-132) |
2*(110-160) |
2*(132-200) |
|
80 Series grading teeth-roller crusher for coarse crushing |
Model
Specification |
2PLF-80/150 |
2PLF-S05/12 |
2PLF-S05/15 |
2PLF-S05/20 |
|
Inlet Size(mm) |
<=550 |
<=550 |
<=550 |
<=550 |
|
Discharge Size(mm) |
50-150 |
50-150 |
50-150 |
50-150 |
|
Capacity(t/h) |
200-600 |
260-750 |
300-1000 |
400-1150 |
|
Single Driven Type Motor Power(kw) |
132-160 |
160-200 |
185-250 |
250-280 |
|
Dual Driven Type Motor Power(kw) |
2*(75-90) |
2*(90-132) |
2*(110-185) |
2*(132-220) |
|
60 Series grading teeth-roller crusher for coarse crushing |
Model
Specification |
2PLF-60/70 |
2PLF-60/120 |
2PLF-60/150 |
2PLF-60/200 |
|
Inlet Size(mm) |
<=400 |
<=400 |
<=400 |
<=400 |
|
Discharge Size(mm) |
50-150 |
50-150 |
50-150 |
50-150 |
|
Capacity(t/h) |
80-240 |
200-600 |
250-700 |
300-800 |
|
Single Driven Type Motor Power(kw) |
37-55 |
45-90 |
55-110 |
75-160 |
|
Dual Driven Type Motor Power(kw) |
2*(15-37) |
2*(18.5-45) |
2*(37-55) |
2*(45-90) |
The pre-sale service
To provide you with the project and process design, make purchase plan for your, or design and manufacture the products according to your special needs.
The sale of services
To accompany you to complete the equipment inspection and acceptance, assists to draft the construction scheme and detailed process.
The after-sale service
The company sent technical personnel to the scene to guide the installation of equipment, commissioning machine and training of operator.
24 hours round-the-clock telephone service, holiday services as usually.
More Picture
|
