Products & Services
China Truck Adblueobd2 Emulator For DAFwholesale good qualityTruck Adblueobd2 www.x431update.org
Jan 7 2016 00:45
Product DescriptionTruck Adblueobd2 Emulator For DAF Its very easy to fit Adblueobd2 Emulator Box to any truck or bus equipped with Adblueobd2 system and it will override Adblueobd2 system instantly, it will stop the usage of Adblueobd2 liquid. Adblueobd2 Emulator Box disables Adblueobd2 system electronics gently so there will be no power loss of the engine or any warnings on the dashboard and in diagnostic system.This device works without interfering to work of other electronic systems of the vehicle. Adblueobd2 Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the Adblueobd2 Emulator Box and you can install it on any supported truck. The connections details diagram and wire colours refer to IVECO STRALIS Year 2009, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original ECU, Adblueobd2 liquid is higher than the reserve level and the truck batteries are disconnected from the system. 5 conductors: DAF Adblueobd2 Emulator Activation The minusblue module and the original Adblueobd2 module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working. It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 20A fuse(F4) and the existing Adblueobd2 module. The minusblue module will automatically be activated.To re-instate the original Adblueobd2 module, all that needs to be done is to reinstall F4 fuse before starting the engine. The minusblue module will automatically be de-activated. DAF Adblueobd2 Emulator Self Learning When the minusblue module is fully connected to the electrical circuit of the original Adblueobd2 module, and after identification of the F4 fuse controlling the power feeding to the original Adblueobd2 module the truck batteries can be The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off). After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on). LED FUNCTION ON - OFF KEY OF: - RED OFF, GREEN OFF - NO POWER FEEDING. When this box connected - Adblueobd2 system of the truck would be fully emulated, no errors related to Adblueobd2.The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck. Skype : kellie-obding Whatsapp : + 86 133 029
50980 (16 Hours Online!) Company Website : www.x431update.org
Personal Website: www.x431update.com |