Products & Services
Truck Adblueobd2 Emulator Quality B www.x431update.org
Jan 7 2016 00:37
Product DescriptionTruck Adblueobd2 Emulator For Volvo Quality B It is very easy to fit Adblueobd2 Emulator Box to any truck or bus equipped with Adblueobd2 system and it will override Adblueobd2 system instantly, it will stop the usage of Adblueobd2 liquid. Adblueobd2 Emulator Box disables This device works without interfering to work of other electronic systems of the vehicle. Adblueobd2 Emulator Box has a wide range of supported vehicle models and there is only one version of emulator for all supported trucks, just upload the necessary program to the Adblueobd2 Emulator Box and you can install it on any supported truck. Volvo Adblueobd2 Emulator Installation: The connections details diagram and wire colours refer to VOLVO FH16 Year 2008, but the main procedure of the minusblue module does not vary. Before proceeding make sure no faulty codes are memorised in the original Volvo Adblueobd2 Emulator Wiring: 5 Conductors: 1) RED(+15). To be connected to a 24V source enabled when the engine key is in the ON position. This connection will supply power to the minusble Module when the engine key is on(dashboard on). Volvo Adblueobd2 Emulator Activation: The minusblue module and the original Adblueobd2 module CANNOT both be activated at the same time, the GREY ACTIVATION WIRE(+30) is to enable the minusblue module working. It is important to connect the GREY ACTIVATION WIRE(+30) to a 24V source always available(battery), moreover, the soldering operation must be done between the 25A fuse and the existing Adblueobd2 module. If you want to stop and exclude the original Adblueobd2 module from working, all that needs to be done is to remove the 25A fuse before starting the engine. The minusblue module will automatically be activated. To re-instate the original Adblueobd2 module, all that needs to be done is to reinstall 25A fuse before starting the engine. The minusblue module will automatically be de-activated. When the minusblue module is fully connected to the electrical circuit of the original Adblueobd2 module, and after identification of the 25A fuse controlling the power feeding to the original Adblueobd2 module the truck batteries can be Re-connected. The minusblue module aquires the inputs from the CANBUS the first time the dashboard is turned on(key on but engine still off). 1) Make sure the 25A fuse is inserted. After this procedure the minusblue module will be activated whenever the dashboard is turned on(key on). The Result will be: 1) If the 25A fuse is installed the original Adblueobd2 system will be working. Both red and green leds will be on. LED FUNCTION ON - OFF KEY OFF:- RED OFF, GREEN OFF - NO POWER FEEDING. When this box connected - Adblueobd2 system of the truck would be fully emulated, no errors related to Adblueobd2.The box can be fast and easy installed to truck. You can disconnect it, reset and install into another truck PCB Board: Package List: 1pc x Adblueobd2 Emulator 1pc x Box Skype : kellie-obding Whatsapp : + 86 133 029 50980 (16 Hours Online!) Company Website : www.x431update.org Personal Website: www.x431update.com |